NEC Electra Elite 48/192 Features And Specifications Manual page 230

Electra Elite
SERVICE CONDITIONS
Features and Specifications Manual
To record a CO conversation in progress using Manual Live
Record:
1. Press the Feature Access key programmed as the Record key.
The Record key flashes red when Live Record begins and
flashes green when Live Record is addressed.
displayed in the lower section of the LCD on a Multiline Terminal.
2. To store the recorded conversation, dial a mailbox number or
press a One-Touch key or Feature Access key programmed with
the mailbox number.
lower section of the LCD on a Multiline Terminal. (XXXXXX is the
station name/number where the conversation is stored.)
Digital Voice Mail
General:
An Elite 192 system supports up to 32 DVM ports using S6000
¥
Series software or higher.
An Elite 48 system supports up to 24 DVM ports using S6000 Series
¥
software or higher.
A FMS(X), VMS(X)-U10 or CTI/VP(X)-U10 ETU must be installed to
¥
provide Digital Voice Mail.
All Multiline Terminals (with or without an LCD) and Single Line
¥
Telephones (with a Message Wait Lamp) receive an indication that a
Voice Mail message is waiting.
• Multiline Terminals equipped with an LCD receive a message in
the LCD indicating a message is waiting.
• The Large LED and Feature (FNC) LED flashes red to indicate
message waiting on all Multiline Terminals.
• Single Line Telephones supported by an SLI(8)-U10 ETU light
the Message Wait LED to indicate a message is waiting.
A Feature Access key or One-Touch key can be assigned for easy
¥
message access.
When a call transferred from a Voice Mail port is not answered in
¥
three minutes (fixed time), the call recalls to the Voice Mail port.
When a station is programmed for multiple Call Forward (e.g.,100
¥
CFWD - 101 CFWD - VM Hunt Group) and a call is made to station
100, the caller is forwarded to the mailbox for station 100.
RECORD XXXXXX is displayed in the
Issue 6
RECORD is
D - 21