Class Of Service - NEC Electra Elite 48/192 Features And Specifications Manual

Class of Service

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
Class of Service assigns and controls access to features. Various Class of
Service combinations can be programmed. Stations are then assigned
according to the features they can access.
Terminal Type:
All Multiline Terminals
Required Components:
None
None
Data Assignment:
Use Memory Block 1-8-07 [Class of Service (Attendant) Feature
¥
Selection 1] to assign Class of Service Attendant Features.
Use Memory Block 1-8-08 [Class of Service (Station) Feature Selection
¥
2] to assign Station Features.
¥ Use Memory Block 4-17 (Station to Class of Service Feature
Assignment) to assign each station to one class for both Class of
Service Assignments.
At default, Memory Block 1-8-07 [Class of Service (Attendant) Feature
¥
Selection 1] Station Class 00 is set to Allow (LED On) all features
(except System-Wide Reset) and Station Classes 01~15 are set to Deny
(LED Off) all features.
At default for Attendant Features, Stations 100 and 101 are set for Class
¥
00 and all others stations are assigned Class 15 using Memory Block
4-17 (Station to Class of Service Feature Assignment).
¥ At default, Memory Block 1-8-08 [Class of Service (Station) Feature
Selection 2] Station Class 00 is set to Allow (LED On) most features.
Station Classes 01~15 are set to Deny (LED Off) all features.
C-17
C - 67