NEC Electra Elite 48/192 Features And Specifications Manual page 378

Electra Elite
Features and Specifications Manual
Only at the station where the Exclusive Hold was set can a user
¥
retrieve the held call, until the call recalls.
Use Memory Block 1-1-63 [Hold Recall Time Selection (Exclusive)]
¥
to specify the time (default: 1 minute) that the call is held or parked
before it recalls to the station where the call was placed on Hold.
The LED of other Multiline Terminals for the held line have a red LED
¥
on until the call recalls.
Exclusive Hold and Non-Exclusive Hold Recall time intervals can be
¥
adjusted independently of one another.
Hold Recall
Use Memory Block 4-30 (Hold Transfer Recall Display Selection), to
¥
enable (default: YS) or disable (NO) the Hold Recall indication on the
LCD.
When a held line recalls, Multiline Terminals equipped with an LCD
¥
receive the following information: the upper LCD line shows the
recalling outside line number, the lower LCD line shows the station
number the call was held at and the station number where the call
was transferred (used for recalling Ring Transfer or Camp-On calls).
Non-Exclusive Hold, Ring Transfer, Hold Recall, Call Park System,
¥
and Attendant Ring Transfer/Camp-On have separate Recall Timers.
For Multiline Terminals, internally held calls do not recall.
¥
A Recall Tone is provided when the handset is on-hook. Off-hook
¥
ringing is not provided if the handset is off-hook.
Single Line Telephone
When the user goes on-hook during Exclusive Hold, recall
¥
immediately follows.
When a line is holding on a Multiline Terminal, the red LED is on until
¥
the Exclusive Hold Recall Time expires.
The System Call Park feature can be used to put calls on hold.
¥
Issue 6
H - 11