NEC Electra Elite 48/192 Features And Specifications Manual page 90

Table of Contents

Advertisement

Electra Elite
Features and Specifications Manual
Only Feature Group D (FGD) protocol is supported.
¥
In the Electra Elite 192 System, the DTI-U10/20 ETU must be
¥
installed in the Basic KSU slot S1 or S4, or slot S1 of the first 64 port
expansion module. In the Electra Elite 48 system, slot S4 of the
B48-U10 KSU must be used.
The DTI-U10 ETU supports Feature Group D Incoming only signaling
¥
using System Software S3000 or higher. The DTI-U20 ETU
supports Feature Group D Incoming/Outgoing using System
Software S4500 or higher. The DTI-U20 supports Incoming MF wink
start signaling and DTMF outgoing signaling.
General:
Caller ID indication and Automatic Number Indication (ANI) are so
¥
functionally similar that they can be assumed to have the exact same
abilities and limitations.
While the Multiline Terminal is ringing, the ANI Indication is displayed
¥
on the top section of the LCD.
A maximum of 13 characters can be displayed on the LCD.
¥
Press the green line key where the CO call resides during a CO call,
¥
to verify the ANI information from any display terminal.
When the station is assigned to receive DIT/ANA calls, Caller ID is
¥
displayed only on the Multiline Terminal where DIT/ANA is assigned
to ring. ANI/Caller ID follows the station Call Forward setting or
Station Hunting feature.
When a Multiline Terminal is busy, the ANI/Caller ID is displayed for
¥
an incoming call.
When a Multiline Terminal is set for Do Not Disturb, the ANI/Caller ID
¥
is displayed for incoming calls.
When a Multiline Terminal receives multiple incoming calls, the first
¥
caller identification is displayed. After the first call is answered, the
second caller identification is displayed.
The ANI/Caller ID disappears under the following conditions:
¥
When an incoming call is answered.
When an internal or ring transferred call is received.
When a key (i.e., Feature Access, DSS, Redial, or Feature key)
is pressed.
The caller number is printed on the Station Message Detail
¥
Recording printout for incoming calls that are answered at stations
that can display ANI/Caller ID data. The name is not printed.
Issue 6
A - 69

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents