NEC Electra Elite 48/192 Features And Specifications Manual page 7

Electra Elite 48 System Hardware Manual (Stock Number 750376)
The System Hardware Manual is provided for the system installer. This
manual has detailed instructions for installing the Electra Elite 48 KSU, ETUs,
Multiline Terminals, and optional equipment.
Electra Elite 48/192 Programming Manual (Stock Number 750362)
This manual provides instructions for programming the Electra Elite 48/192
system using a Multiline Terminal or PC.
Electra Elite Least Cost Routing Manual (Stock Number 750364)
This manual provides instructions to the service technician for programming
the customer site for least cost routing.
Electra Elite Automatic Call Distribution Manual (Stock Number 750365)
This manual provides the service technician with instructions for programming
the ACD. This manual can also be used by the ACD supervisor, at the
customer site, to use to become familiar with the ACD/MIS feature. ACD is
not supported by the Electra Elite 48 system.
Electra Elite 48/192 Job Specifications Manual (Stock Number 750377)
This manual helps the technician install and maintain the Electra Elite system.
This manual contains the job specification worksheets. When these
worksheets are completed, they provide all of the system programming values
and configuration information necessary to assist technicians in maintaining
the system.
Elite ACD Plus Installation Manual (Stock Number 750359)
This manual provides general information about the Elite ACD Plus features,
installation procedures and feature programming. The NEC Elite ACD Plus is
an Automatic Call Distribution card that supports up to 40 Agents and 12
supervisors at one time.
Electra Elite Wireless System Manual (Stock Number 750423)
This manual describes the system and provides hardware installation and
programming procedures for the Electra Elite Wireless Communication
System (WCS).