E&M Tie Lines (4-Wire - NEC Electra Elite 48/192 Features And Specifications Manual

E&M Tie Lines (4-Wire)
FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
E&M Tie Lines (4-Wire) can be connected to the system to provide
communication between remote systems and facilities.
receive and/or transmit DTMF or DP signals on E&M Tie Lines.
Terminal Type:
All Multiline Terminals
Required Components:
TLI(2)-U10 ETU
To originate a call:
1. Dial the Trunk Group Access Code assigned for E&M Tie Lines.
2. Dial the station to be called, or when using Uniform Numbering
Network, dial the distant system number and the station to be called,
or dial the Trunk Access Code and number to be called.
1. Press the line key with direct E&M Tie Line appearance, and wait for
a dial tone.
2. Dial the station to be called when using Uniform Numbering Network,
dial the distant system number and the station to be called, or dial
the Trunk Access Code and number to be called.
Data Assignment:
Use Memory Block 1-1-07 (Tie Line Delay Ringing Time Selection) to
¥
specify delay ringing time (default:
Use Memory Block 1-1-34 (Tie Line First Ring Pattern Selection) to
¥
select specific ringing tone patterns (default: Pattern 3) for incoming Tie
line calls.
- OR -
∞
, no limit).
E-3
The system can
E - 7