NEC Electra Elite 48/192 Features And Specifications Manual page 471

Issue 6
SERVICE
CONDITIONS
P - 14
To access an internal dial tone for Feature Access or an internal
call at a Single Line Telephone:
1. Lift the handset.
2. Press the hookswitch.
3. Dial the desired Feature Access Code or station number.
Data Assignment:
Use Memory Block 4-23 (Prime Line/Hot Line Assignment) to assign
¥
Prime Line to a Trunk, Trunk Group, or Route Advance Block.
Prime Line is assigned per station.
¥
Restrictions:
When Prime Line is busy or on Hold, a busy tone is received when
¥
user goes off-hook. Another line must be seized manually.
General:
Ringing Line Preference takes priority over Prime Line when both
¥
features are assigned.
Internal Dial Tone Access Codes can be stored on a Feature Access
¥
or One-Touch key.
An internal line can be seized by pressing the ICM key (when
¥
assigned) before going off-hook.
Prime Line can be assigned to a Single Line Telephone.
¥
When a Single Line Telephone user provides a hookflash, the outside
¥
line is put on hold and internal dial tone is heard. To return to the
outside line, provide another hookflash.
The Service Conditions for Multiline Terminals when the Feature key
¥
and Access Code 6
• The seized outside line is disconnected and internal dial tone is
provided.
• During an internal call or when receiving call waiting tone, busy
tone, or reorder tone, press the Feature key and dial 6
to provide new internal dial tone.
• When an incoming internal or ring transfer call is being received
while off-hook, and an outside dial tone is received, press the
Feature key and dial 6
are used to access intercom dial tone include:
,
to answer the call.
,
Electra Elite
again
,
Prime Line Assignment