Dependencies - Siemens SINAMICS S120 Function Manual

Basic functions
8.21 Tolerant encoder monitoring
8.21.14

Dependencies

Overview
The table below gives you an overview of the dependencies between the individual function
extensions.
Parameter
Indices
p0405.2 Track monitoring
p0430.20 Speed calculation mode
p0430.21 Zero mark tolerance
p0430.22 Rotor position adaptation
p0437.1 Zero mark edge detection
p0437.2 Actual position value correction
XIST1
p0437.4 Edge evaluation
p0437.5 Edge evaluation
p0437.6 Freezing the actual speed for dn/dt
errors
p0437.7 Uncorrected encoder pulses accu‐
mulate
p0437.26 Deselection, track monitoring
p0438 Square-wave encoder filter time
r0452 Square-wave encoder filter time dis‐
play
p0453 Pulse evaluation zero speed meas‐
uring time
p4680 Zero mark monitoring tolerance per‐
missible
p4681 Zero mark monitoring tolerance win‐
dow limit 1 positive
p4682 Zero mark monitoring tolerance win‐
dow limit 1 negative
p4683 Zero mark monitoring tolerance win‐
dow alarm threshold positive
p4684 Zero mark monitoring tolerance win‐
dow alarm threshold negative
p4685 Speed actual value averaging
p4686 Zero mark, minimum length
p4688 Zero mark monitoring, number of
differential pulses
382
These functions can be freely combined with one
another
1 2 3 4
x
x
x
x
x
x
Functionality
5 6 7 8
x
x
x
x
x
x
x
x
Function Manual, 06/2019, 6SL3097-5AB00-0BP2
These functions
build on one an‐
other from left to
right, and can be
combined with
the adjacent ones
9 10 11
x
x x
x x
x
x
x
x
x
x
x x
Drive functions