Siemens SINAMICS S120 Function Manual page 683

● List of all safety-relevant parameters and their values in the PDS(SR)
● Checksum, test date and confirmation by testing personnel
Acceptance test
The acceptance test comprises 2 parts:
● Checking whether the safety functions in the converter are correctly set:
– Does the speed control handle the configured application cases in the machine?
– Do the set interface, times and monitoring functions match the configuration of the
● Checking whether the safety-relevant functions in the plant or machine function correctly.
This part of the acceptance test goes beyond the converter acceptance test:
– Are all safety equipment such as protective door monitoring devices, light barriers or
– Does the higher-level control correctly respond to the safety-relevant feedback signals
– Do the converter settings match the configured safety-relevant function in the machine?
Documentation
The documentation consists of the following parts:
● Description of the safety-relevant components and functions of the machine or plant.
● Report of the acceptance test results.
● Report of the settings of the safety functions.
● Countersigned documentation.
Authorized persons
Personnel from the machine manufacturer, who, on account of their technical qualifications and
knowledge of the safety functions, are in a position to perform the acceptance test in the correct
manner.
Unwanted motion due to incorrect parameter changes
Incorrect parameter changes for SI functions can result in unwanted motion leading to death
or severe injury.
● After making a change to a parameter for the Safety Integrated Functions, always perform
● Document the values calculated in an acceptance report.
Drive functions
Function Manual, 06/2019, 6SL3097-5AB00-0BP2
machine?
emergency-off switches connected and ready for operation?
of the converter?
WARNING
an acceptance test for the function in question.
Safety Integrated Basic Functions
11.11 Acceptance test and acceptance report
681