Siemens SINAMICS S120 Function Manual page 820

Hide thumbs Also See for SINAMICS S120:

Table of Contents

Basic information about the drive system

14.8 Know-how protection

3. Select the required drive unit in the project navigator of your STARTER project.

4. Call the "Load to file system" function.

The "Load to File System" dialog box opens.

Figure 14-19

Specifying the general memory data

The "General" tab is displayed automatically when the dialog is called. The "Save normally"

option is activated by default.

1. If you want to save the data in compressed form, click the "Save compressed (.zip archive)"

option button.

The "Store additional data on the target device" option is deactivated in the default setting.

2. If you want to store additional data, such as program sources, on the target device, activate

this option.

– Optionally you can also activate "Including DCC chart data". Graphical chart data can

3. Enter the path for the storage directory in the appropriate input field, or click "Browse" and

select the directory in your file system.

Load to file system (default setting)

then also be stored.

Function Manual, 06/2019, 6SL3097-5AB00-0BP2

Drive functions