Siemens SINAMICS S120 Function Manual page 894

Appendix
A.4 Parameterization using the BOP20
Example: Change a parameter
Requirement: The appropriate access level is set (for this particular example, p0003 = 3).
Figure A-12
Example: Changing parameters for the binector and connector input
For the binector input p0840[0] (OFF1) of drive object 2 binector output r0019.0 of the Control
Unit (drive object 1) is interconnected.
Figure A-13
892
Example: Changing p0013[4] from 0 to 300
Example: Changing indexed binector parameters
Function Manual, 06/2019, 6SL3097-5AB00-0BP2
Drive functions