Siemens SINAMICS S120 Function Manual page 908

Appendix
A.7 Availability of SW functions
No. SW function
20 1FS6 explosion-protected motors
21 SME20/25 external Sensor Modules for incremental and absolute
encoder evaluation
Table A-23 New functions, firmware 2.4 or 2.4 SP1
No. SW function
1 SINAMICS S120 functionality for AC DRIVE (CU310 DP/PN)
2 Basic positioning
3 Encoder data set changeover (three EDS encoder data sets per
drive data set)
4 Two command data sets (CDS)
5 Units changeover SI / US / %
6 Motor data identification servo
7 Increased torque accuracy for synchronous motors (kt estimator)
8 Hub functionality (hot-plugging, distributed encoder, star structure
via DMC20)
9 Basic Operator Panel BOP20
10 Evaluation of SSI encoder (SMC30)
11 Pulse encoder emulation TM41
12 Automatic restart with Active Line Module
13 PROFIBUS extensions:
– Slave-to-slave communication
– Y link
– Telegram 1 also for servo
– Telegram 2, 3, 4 also for vector
14 Safety Integrated Stop category 1 (SS1) with safety-related time
15 Measuring gearbox
16 Setting the pulse frequency grid in fine steps
17 Controller cycles that can be set
18 Possibility of mixing cycles on a DRIVE-CLiQ line
19 Clockwise/counter-clockwise bit (the same as changing the rotating
field)
20 Sensor Module for 1FN, 1FW6 with protective separation
(SME120/125)
21 Real-time stamps for alarms
22 Encoderless closed-loop speed control for torque motors
23 Separately excited synchronous motors with encoder
906
SERVO VECTOR HW component
x - -
x x -
SERVO VECTOR HW component
x x -
x x -
x x -
x x -
x x -
x As of -
FW2.1
x - -
x x -
x x -
x x 6SL3055–0AA00–
5CA1
x x -
x x -
-
x x
x x
x As of
As of FW2.1
FW2.1 x
x x -
x x -
x x -
x x -
x x -
x x -
x - -
x x CU320, 6SL3040–
... –0AA1 and Ver‐
sion C or higher (cur‐
rently 2014:
6SL3040– ... –0AA0)
- x -
- x -
Function Manual, 06/2019, 6SL3097-5AB00-0BP2
Drive functions