Siemens SINAMICS S120 Function Manual page 781

● Display and copy the serial numbers of the memory cards being used.
● Activating the Trial License Mode (see Chapter "Activating Trial License Mode
(Page 781)").
Trial License Mode
General Information
The Trial License Mode comprises a total of 3 Trial License Periods. Each individual Trial
License Period has a 300 hour operating time that cannot be changed, and which must be
individually activated. A maximum operating time of 900 hours (3 · 300 hours) is obtained for
the Trial License Mode.
Note
Using functions in the Trial License Mode
Trial License Mode supports a variety of functions that require licenses. Using Trial License
Mode, you can use functions that require licenses for a limited time without purchasing a
license.
Figure 14-5
Applications
The 1st Trial License Period is used for commissioning and the tests that are carried out in the
commissioning phase. The 2nd and 3rd Trial License Periods are intended for testing,
presentations/demonstrations or service.
Drive functions
Function Manual, 06/2019, 6SL3097-5AB00-0BP2
Trial License Mode: Trial License Periods and applications
Basic information about the drive system
14.3 Licensing
Apply for
and enter
licenses
779