Decommissioning; Introduction - ABB IRC5 Product Manual

5 Decommissioning

5.1 Introduction

Introduction
This section contains information to consider when taking a product, robot or
controller, out of operation.
It deals with how to handle potentially dangerous components and potentially
hazardous materials.
General
All used grease/oils and dead batteries must be disposed of in accordance with
the current legislation of the country in which the robot and the control unit are
installed.
If the robot or the control unit is partially or completely disposed of, the various
parts must be grouped together according to their nature (which is all iron together
and all plastic together), and disposed of accordingly. These parts must also be
disposed of in accordance with the current legislation of the country in which the
robot and control unit are installed.
Disposal of storage media
Before disposal of any storage equipment (anything from an SD card to a complete
controller), make sure that all sensitive information has been deleted.
Product manual - IRC5
3HAC047136-001 Revision: M
Tip
To remove all data from the SD card, use the Clean Disk function (part of
Recovery Disk function) in RobotStudio. See Operating manual - RobotStudio.
© Copyright 2004-2018 ABB. All rights reserved.
5 Decommissioning
5.1 Introduction
297