ABB IRC5 Product Manual page 263

Removal
Use this procedure to remove the Remote Service box.
1
2
3
4
Refitting
Use this procedure to refit the Remote Service box.
1
2
Product manual - IRC5
3HAC047136-001 Revision: M
Action
DANGER
Before commencing any work inside the cab-
inet, please observe the safety information in
section Make sure that the main power has
been switched off on page
WARNING
The unit is sensitive to ESD. Before handling
the unit please observe the safety information
in section The unit is sensitive to ESD on
page 34.
Disconnect all connectors from the Remote
Service box.
Push the spring locks in the arrow direction
and lift the box out.
Action
DANGER
Before commencing any work inside the cabin-
et, please observe the safety information in
section Make sure that the main power has
been switched off on page
WARNING
The unit is sensitive to ESD. Before handling
the unit please observe the safety information
in section The unit is sensitive to ESD on
page 34.
© Copyright 2004-2018 ABB. All rights reserved.
4.18 Replacement of Remote Service box
Note/illustration
26.
xx0800000091
•
Note/illustration
26.
4 Repair
Continued
A: Spring lock
Continues on next page
263