ABB IRC5 Product Manual page 143

9
10
Product manual - IRC5
3HAC047136-001 Revision: M
2.9.7 Installing the EPS board DSQC 646 for Electronic Position Switches
Action
Remove the Ethernet cable between the
main computer and the axis computer.
Replace it with the long Ethernet cable
from the EPS board to the main com-
puter. Connect the short Ethernet cable
between the EPS board and the axis
computer.
Remove the SMB cable from the axis
computer and connect it to the EPS
board.
Connect the SMB cable from the EPS
board to the axis computer.
© Copyright 2004-2018 ABB. All rights reserved.
2 Installation and commissioning
Note/illustration
xx0600003218
xx0600003207
Continues on next page
Continued
143