ABB IRC5 Product Manual page 270

4 Repair
4.20 Replacement of drive system fans
Continued
2
3
4
5
6
7
270
Action
If the fan is temperature sensor controlled,
fit the sensor and connect it as described
in Replacement of sensors for the drive
system fans on page 271.
Reconnect the connector to the fan.
Refit the fan by placing the latches in the
back of the fan housing in the grooves.
Refit the cover and the attachment screws.
Refit the moist dust filter magazine. (Op-
tion)
Perform the function tests in section
Function tests on page 196
safety features work properly.
© Copyright 2004-2018 ABB. All rights reserved.
Note/illustration
xx0500002015
A Fan
B Latches
C Grooves
to verify that the
Product manual - IRC5
3HAC047136-001 Revision: M