ABB IRC5 Product Manual page 238

4 Repair
4.10 Replacement of fieldbus adapter in the computer unit
Continued
Refitting
The following procedure details how to refit the fieldbus adapter in the computer
unit.
1
2
3
Continues on next page
238
Action
DANGER
Before commencing any work inside the
cabinet, please observe the safety inform-
ation in section Make sure that the main
power has been switched off on page
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit please observe the
safety information in section
sensitive to ESD on page 34
Fit the fieldbus adapter in position by
pushing the fieldbus adapter along the
rails on the motherboard.
CAUTION
Push carefully so no pins are damaged.
Make sure that the adapter is pushed
straight onto the rails.
© Copyright 2004-2018 ABB. All rights reserved.
Note/Illustrator
26.
The unit is
xx1500001755
A Fieldbus adapter
CAUTION
Always grip the fieldbus adapter around the
edges to avoid damage to the adapter or its
components.
A
Product manual - IRC5
3HAC047136-001 Revision: M