ABB IRC5 Product Manual page 295

2
3
4
5
6
Product manual - IRC5
3HAC047136-001 Revision: M
Action
Refit the power supply by sliding the recesses in
beneath the lower screw heads, and push it inwards
and the downwards.
Refit the two upper attachment screws.
Tighten the attachment screws (4 pcs).
Reconnect all connectors to the unit.
Perform the function tests in section
on page 196 to verify that the safety features work
properly.
© Copyright 2004-2018 ABB. All rights reserved.
4.26.3 Replacement of system power supply
Note/Illustration
xx0700000125
• A: upper attachment
screws
• B: lower attachment screws
Function tests
4 Repair
Continued
295