ABB IRC5 Product Manual page 56

2 Installation and commissioning
2.4.4 Mounting the FlexPendant holder
Continued
Procedure - On the control cabinet door
The following procedure details how to mount the FlexPendant holder on the control
cabinet door.
1
2
3
Continues on next page
56
Action
At assembly of FlexPendant holder on
the mounting plate start with fasten the
Fastite screws (2 pcs) to the mounting
plate.
Fasten the two hooks on the mounting
plate with two Fastite screws for each
hook.
Mount the FlexPendant holder and cable
bracket to the mounting plate with the
enclosed Fastite screws (6 pcs).
Note
Remove the metal sheet plate from the
FlexPendant holder before attaching the
holder on to the mounting plate.
© Copyright 2004-2018 ABB. All rights reserved.
Note/Illustration
xx0800000048
• A: Fastite screw (2 pcs)
xx1100000052
xx1700001453
• A: Cable bracket
• B: FlexPendant holder
• C: FlexPendant metal sheet plate
Product manual - IRC5
3HAC047136-001 Revision: M