ABB IRC5 Product Manual page 179

6
Assemble the sensor controlled fan
1
2
3
Product manual - IRC5
3HAC047136-001 Revision: M
2.9.14 Installation of drive system fans with temperature sensors
Action
Push the fan upwards and remove it.
Action
Fit the gaskets in all the four corners on
the inside of the fan holder.
Fit the fan in the fan holder. Look at the
indication of air flow direction to make
sure the fan is inserted the correct way.
Fit the connector for fan power supply
from above into the outer hole on the
bracket of the fan holder.
© Copyright 2004-2018 ABB. All rights reserved.
2 Installation and commissioning
Note /illustration
xx0500002015
A Fan
B Latches
C Grooves
Note/illustration
C
D
E
xx1500001754
A Fan holder
B Fan
C Power supply connector
D Sensor connector
E Gasket (4 pcs)
F Indication of air flow direction
Continues on next page
Continued
A
B
F
179