ABB IRC5 Product Manual page 178

2 Installation and commissioning
2.9.14 Installation of drive system fans with temperature sensors
Continued
6
7
Removing the old drive system fan
1
2
3
4
5
Continues on next page
178
Action
Push the fan upwards, and pull
it out.
Remove the cable and replace
the cable gland with the grom-
met.
Action
DANGER
Before commencing any work inside the
cabinet, please observe the safety inform-
ation in section Make sure that the main
power has been switched off on page
Remove the moist dust filter magazine.
(Option)
Loosen the four attachment screws to the
cover.
Remove the cover.
Disconnect the connector to the fan.
© Copyright 2004-2018 ABB. All rights reserved.
Note/Illustration
xx0700000417
A Fan
B Screw
C Cable gland
Note /illustration
26.
How to remove the moist dust filter
magazine is detailed in section
ment of moist dust filter on page
C
Replace-
187.
Product manual - IRC5
3HAC047136-001 Revision: M