ABB IRC5 Product Manual page 289

Refitting
The procedure below details how to refit the power distribution unit.
1
2
3
4
5
Product manual - IRC5
3HAC047136-001 Revision: M
Action
DANGER
Before commencing any work inside the
cabinet, please observe the safety inform-
ation in section Make sure that the main
power has been switched off on page
Refit the new power distribution unit by
pushing it leftward to fit the left screw
head.
Refit the right screw.
Lock the unit in place by tighten the attach-
ment screws.
Reconnect the connectors X1 - X9.
Perform the function tests in section
Function tests on page 196
the safety features work properly.
© Copyright 2004-2018 ABB. All rights reserved.
4.26.1 Replacement of power distribution unit
Note/Illustration
26.
CAUTION
Hot surface on top of the power distribution
unit.
Do not route or place cables on top of the
power distribution unit.
to verify that
4 Repair
Continued
289