4 Repair
4.23 Replacement of brake resistor bleeder
Continued
3
4
5
6
7
8
282
Action
Slide the new bleeder in to place and fit
the attachment screws in the key hole at-
tachments.
Tightening the four attachment screws.
Reconnect the connectors.
Refit the covers.
Refit the moist dust filter magazine. (Op-
tion)
Perform the function tests in section
Function tests on page 196
the safety features work properly.
© Copyright 2004-2018 ABB. All rights reserved.
Note/illustration
xx0500002020
•
A: attachment screw (4 pcs)
•
B: connectors
•
C: brake resistor bleeder
•
D: bleeder attachment screw (4 pcs)
to verify that
Product manual - IRC5
3HAC047136-001 Revision: M