Goose Function Blocks; Received Goose Binary Information Goosercv_Bin; Function Block - ABB RELION REX640 Technical Manual

1MRS759142 C
Table 132: UTVTR (Uo) Non group settings (Basic)
Parameter Values (Range)
Primary voltage
Secondary voltage
Amplitude Corr
Angle correction
Table 133: UTVTR (Uo) Non group settings (Advanced)
Parameter Values (Range)
Frequency adaptivity
3.18
3.18.1
3.18.1.1
REX640
Technical Manual
Unit
0.100...440.000 kV
57...240 V
0.9000...1.1000
-20.0000...20.0000 deg
Unit
0=Disable
1=Enable

GOOSE function blocks

GOOSE function blocks are used for connecting incoming GOOSE data to
application. They support BOOLEAN, Dbpos, Enum, FLOAT32, INT8 and INT32
data types.
Common signals
The VALID output indicates the validity of received GOOSE data, which means in
case of valid, that the GOOSE communication is working and received data quality
bits (if configured) indicate good process data. Invalid status is caused either by bad
data quality bits or GOOSE communication failure. See IEC 61850 engineering guide
for details.
The OUT output passes the received GOOSE value for the application. Default value
(0) is used if VALID output indicates invalid status. The IN input is defined in the
GOOSE configuration and can always be seen in SMT sheet.
Settings
The GOOSE function blocks do not have any parameters available in LHMI or
PCM600.

Received GOOSE binary information GOOSERCV_BIN

Function block

GUID-180C83BD-FD74-40F7-8339-08839B2D805D V1 EN
Figure 75: Function block
Step Default
0.001 11.547
1 100
0.0001 1.0000
0.0001 0.0000
Step Default
0=Disable
Section 3
Basic functions
Description
Primary voltage
Secondary voltage
Amplitude correction
Angle correction factor
Description
Frequency adaptivity selection
193