ABB RELION REX640 Technical Manual page 96

Section 3
Basic functions
90
Table 21: Protocol write access in the protection relay
Parameter
Configuration/Authorization/
Network1/FTP write access
Configuration/Authorization/
Network1/MMS write access
Configuration/Authorization/
Network1/HTTPS write access
Configuration/Authorization/
Network2/FTP write access
Configuration/Authorization/
Network2/MMS write access
Configuration/Authorization/
Network2/HTTPS write access
Configuration/
Authorization/HMI/FTP write
access
Configuration/
Authorization/HMI/MMS write
access
If the FTP write access is disabled for a network, the read operation
from Parameter Setting Tool in PCM600 is not be possible for that
network.
Enabling Network 2 IP address requires additional configuration in
PCM600 to define IEC 61580 subnetworks. This configuration is
done via Ethernet Configuration and IEC 61850 Configuration in
PCM600.
Options
Off
On (Default)
Off
On (Default)
Off
On (Default)
Off
On (Default)
Off
On (Default)
Off
On (Default)
Off
On (Default)
Off
On (Default)
1MRS759142 C
Description
FTP write access denied for
Network 1
FTP write access allowed for
Network 1
IEC 61850 MMS write access
denied for Network 1
IEC 61850 MMS write access
allowed for Network 1
HTTPS write access denied for
Network 1
HTTPS write access allowed for
Network 1
FTP write access denied for
Network 2
FTP write access allowed for
Network 2
IEC 61850 MMS write access
denied for Network 2
IEC 61850 MMS write access
allowed for Network 2
HTTPS write access denied for
Network 2
HTTPS write access allowed for
Network 2
FTP write access denied for the
HMI port
FTP write access allowed for the
HMI port
IEC 61850 MMS write access
denied for the HMI port
IEC 61850 MMS write access
allowed for the HMI port
REX640
Technical Manual