Settings - ABB RELION REX640 Technical Manual

Section 3
Basic functions
3.25.2.4
Table 328: SCHLCCH Settings
1) Values (Range)
Parameter
Off
Port n Mode
On
Off
SMV
Filter Mode Xn
GOOSE
GOOSE & SMV
Goose rate limiter
0.512...90.000
Xn
SMV rate limit Xn 0.512...90.000
Def. rate limit Xn 0.512...90.000
1) n = 1...3
298
Table 326: SCHLCCH2 Output signals
Name Type
CH2LIV BOOLEAN
LNK2LIV BOOLEAN
Table 327: SCHLCCH3 Output signals
Name Type
CH3LIV BOOLEAN
LNK3LIV BOOLEAN

Settings

Unit
Description
Status of Ethernet channel X2/LAN
Redundant mode is set to "None" or port is not
When
one of the redundant ports (LAN A or LAN B), value is
TRUE if the port is receiving Ethernet frames.
Otherwise the value is FALSE.
Link status of Ethernet port X2/LAN
Value is "Up" or "Down".
Description
Status of Ethernet channel X3/LAN
When Redundant mode is set to "None" or port is not
one of the redundant ports (LAN A or LAN B), value is
TRUE if the port is receiving Ethernet frames.
Otherwise the value is FALSE.
Link status of Ethernet port X3/LAN
Value is "Up" or "Down".
Step Default
On
Off
10.000
70.000
8.000
1MRS759142 C
Description
Mode selection for
rear port(s). If port is
not used, it can be
set to "Off". Port
cannot be set to "Off"
when Redundant
mode is "HSR" or
"PRP" and port is
one of the redundant
ports (LAN A or LAN
B).
Selection for
message filtering
Goose rate limit
(Mbps)
Sampled measured
values rate limit
(Mbps)
Default rate limit
(Mbps)
REX640
Technical Manual