NEC 78014Y Series User Manual page 182

(3) 16-bit timer output control register (TOC0)
This register controls the operation of the 16-bit timer/event counter output control circuit. It sets R-S type flip-
flop (LV0) setting/resetting, the active level in PWM mode, output inversion enabling/disabling in modes other
than PWM mode and data output mode.
TOC0 is set with a 1-bit or 8-bit memory manipulation instruction.
RESET input sets TOC0 value to 00H.
Symbol 7
TOC0 0
www.DataSheet4U.com
Cautions 1. Timer operation must be stopped before setting TOC0.
2. If LVS0 and LVR0 are read after data is set, they will be 0.
182
CHAPTER 8 16-BIT TIMER/EVENT COUNTER
Figure 8-6. 16-Bit Timer Output Control Register Format
6 5 4 <3>
0 0 0 LVS0
<2> 1 <0> Address
LVR0 TOC01 TOE0 FF4EH
TOE0
0
1
TOC01 In PWM Mode
0
1
LVS0
0
0
1
1
When Reset R/W
00H R/W
16-Bit Timer/Event Counter Output Control
Output disabled (Port mode)
Output enabled
In Other Modes
Active level Timer output F/F control
selection
Active high Inversion operation
disabled
Active low Inversion operation
enabled
LVR0 16-Bit Timer/Event Counter Timer
Output F/F Status Setting
0 No change
1 Timer output F/F reset (0)
0 Timer output F/F set (1)
1 Setting prohibited