Table of Contents
Advertisement
B.3 Debugging Tools
B.3.1 Hardware
IE-78000-R-A
In-circuit emulator
(For integrated debugger)
IE-70000-98-IF-B
Interface adapter
IE-70000-98N-IF
Interface adapter
IE-70000-PC-IF-B
Interface adapter
IE-78000-R-SV3
Interface adapter
IE-78000-R
In-circuit emulator
(For screen debugger)
IE-78014-R-EM
www.DataSheet4U.com
Emulation board
IE-78014-R-EM-A
Emulation board
EP-78240CW-R
Emulation probe
EP-78240GC-R
Emulation probe
Remark The EV-9200GC-64 is sold in five units as a set.
APPENDIX B DEVELOPMENT TOOLS
This is the in-circuit emulator for debugging hardware and/or software when a system is
developed with 78K/0 Series devices. This emulator is designed to be used with the
integrated debugger (ID78K0). This is used together with interface adapter to connect an
emulation probe or host machine.
This adapter is needed when PC-9800 (excluding notebook models) is used as a host
machine of IE-78000-R-A.
This adapter and cable are needed when a PC-9800 notebook-type personal computer
is used as a host machine of IE-78000-R-A.
This adapter is needed when IBM PC/AT is used as a host machine of IE-78000-R-A.
This adapter and cable are needed when an EWS is used as a host machine of IE-
78000-R-A. This adaptor should be connected to the internal board of IE-78000-R-A.
10Base-5 is supported for Ethernet
adapter for other connection.
This is the in-circuit emulator for debugging hardware and/or software when a system is
developed with 78K/0 Series devices. This emulator is designed to be used with the
screen debugger (SD78K/0). This is used together with emulation probe. This emulator
provides an efficient debugging environment by connecting it with a host computer and a
PROM programmer.
This is the board which emulates the peripheral hardware operations specific for the
device (For 5 V). This is used together with in-circuit emulator.
This is the board which emulates hardware operations specific for the device (For 3 to 5.5 V).
This is used together with in-circuit emulator.
This is the probe to connect the in-circuit emulator with a target system. This is for
64-pin plastic shrink DIP (CW type).
This is the probe to connect the in-circuit emulator with a target system.
This is for 64-pin plastic QFP (GC-AB8 type).
One 64-pin socket EV-9200GC-64 is included to facilitate development of target system.
EV-9200GC-64
This socket connects EP-78240GC-R to a target system board designed for 64-pin
Conversion socket
plastic QFP (GC-AB8 type).
TM
connection. It needs a commercially available
527
Advertisement
Table of Contents
