ABB i-bus KNX Product Manual page 106

ABB i-bus® KNX PARAMETERS
7.2.4 In period
This parameter can be used to set the period during which the Maximum number of sent telegrams is
sent. The telegrams are sent as quickly as possible at the start of the period.
The telegram rate limit is deactivated when the value 0 is selected. The device will always attempt to
send the telegrams as quickly as possible.
Options
0 ... 1 ... 59 s
Note
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 106