ABB i-bus KNX Product Manual page 214

ABB i-bus® KNX PARAMETERS
7.10.7.1 Parameter setting
This parameter can be used to define whether the settings for the parameter window are adopted from
the template or each parameter is set individually.
Options
Apply from template
Individual
—
7.10.7.1.1
DEPENDENT PARAMETER
Overwrite scenes on download
This parameter can be used to define whether the scenes in the device are overwritten during a down-
load.
Options
No
Yes
Condition for visibility:
Parameter window Scene assignment \ Parameter Parameter setting \ Option Individual
—
7.10.7.1.2
DEPENDENT PARAMETER
Enable scene assignment x
This parameter can be used to define whether the scene assignment x (x = 1 ... 16) is used.
The default value for scene assignment 2 ... 16 is No. Scenes 2 ... 16 can be enabled only one after the
other.
Options
No
Yes
Condition for visibility:
Parameter window Scene assignment \ Parameter Parameter setting \ Option Individual
The parameterization is adopted from the template for each parameter.
Parameters can be set individually.
•
•
Note
Overwrite scenes on download
Enable scene assignment x
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 214