ABB i-bus KNX Product Manual page 244

ABB i-bus® KNX MAINTENANCE AND CLEANING
10 Maintenance and cleaning
10.1 Maintenance
The device is maintenance-free if used properly. In the event of damage, e.g. during transport and/or
storage, repairs are not allowed to be made.
10.2 Cleaning
1. Disconnect the device from the electrical power supply before cleaning.
2. Clean dirty devices using a dry cloth or a cloth dampened with a soapy solution.
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 244