ABB i-bus KNX Product Manual page 191

ABB i-bus® KNX PARAMETERS
7.10.2 Parameter window Basic settings
The following settings can be made in the Parameter window Basic settings:
• Reaction of output
• Connection with the central group object Switch
• Link with the function Logic/Threshold
• Feedback of switching state
• Enabling of group object Status information
• Reaction on bus voltage failure, bus voltage recovery and download
If several Shutter Actuator outputs are to be set to the same values, parameterization can be per-
formed in Parameter window Switch Actuator template.
Fig. 48: Parameter window Basic settings
Parameter
• Parameter setting
• Reaction of output
• Switch output reacts to central Switch group object
• Output reacts to
• Feedback of switching state via group object "Status switch"
• Enable group object "Status information"
• Reaction on bus voltage failure
• Reaction after bus voltage recovery
• Reaction after ETS download
Note
• Reaction on result "0"
• Reaction on result "1"
• Value of group object "Status switch"
• Send value of group object
• Send value of group object
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 191