ABB i-bus KNX Product Manual page 173

ABB i-bus® KNX PARAMETERS
—
7.9.6.1.1.1
DEPENDENT PARAMETER
Automatic reactivation of automatic sun protection
If automatic sun protection is deactivated via one of the direct group objects, automatic control can be
reactivated automatically after a selectable time.
Options
No
Yes
Condition for visibility:
Parameter window Automatic sun protection \ Parameter Parameter setting \ Option Individual \ Pa-
rameter Deactivation of automatic sun protection \ Option Via group object and direct command
—
7.9.6.1.1.1.1
DEPENDENT PARAMETER
Time for automatic reactivation of automatic sun protection
Options
00:10:00 ... 05:00:00 ... 99:59:59 hh:mm:ss
Condition for visibility:
Parameter window Automatic sun protection \ Parameter Parameter setting \ Option Individual \ Pa-
rameter Deactivation of automatic sun protection \ Option Via group object and direct command \ Pa-
rameter Automatic reactivation of automatic sun protection \ Option Yes
—
7.9.6.1.2
DEPENDENT PARAMETER
Enable group object "Disable automatic sun protection"
This parameter can be used to define whether the group object Disable automatic sun protection is en-
abled. This group object can be used to disable changing to automatic operation.
Options
No
Yes
Condition for visibility:
Parameter window Automatic sun protection \ Parameter Parameter setting \ Option Individual
The group object is not enabled.
The group object is enabled.
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 173