ABB i-bus KNX Product Manual page 213

ABB i-bus® KNX PARAMETERS
7.10.7 Parameter window Scene assignment
This parameter window is visible only if, in the Parameter window Functions, the following option is
set for the parameter Enable function Scenes: Yes .
Up to 16 different scenes can be created and assigned to the output in the Parameter window Scene as-
signment.
More information → Scenes, Page 92.
If several Shutter Actuator outputs are to be set to the same values, parameterization can be per-
formed in Parameter window Switch Actuator template.
Fig. 53: Parameter window Scene assignment
Parameter
• Parameter setting
• Overwrite scenes on download
• Enable scene assignment x
Note
Note
• Scene retrieval additionally via group object
• Scene number
• Delay
• Action for scene
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 213