ABB i-bus KNX Product Manual page 206

ABB i-bus® KNX PARAMETERS
—
7.10.4.1.7
DEPENDENT PARAMETER
Restart staircase lighting after end of permanent ON
This parameter can be used to define how the function Staircase lighting reacts after the function
Permanent ON is ended.
Options
No
Yes
Condition for visibility:
Parameter window Staircase lighting \ Parameter Parameter setting \ Option Individual
The lighting is switched off after the function Permanent ON is ended.
After the function Permanent ON is ended, the Staircase lighting time is started and the lighting re-
mains switched on.
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 206