ABB i-bus KNX Product Manual page 196

ABB i-bus® KNX PARAMETERS
—
7.10.2.1.7
DEPENDENT PARAMETER
Reaction after bus voltage recovery
This parameter can be used to define which value (if any) is written to the group object Switch and af-
fects the output reaction after bus voltage recovery.
With the Logic/Threshold, Disable and Forced Operation functions or the safety priority, writing the
group object Switch does not necessarily result in a changed contact position.
The value of group object Switch can be read correctly only after a new value has been received via the
ABB i-bus® KNX.
Options
Write group object "Switch"
with 0
Write group object "Switch"
with 1
Do not write group object
"Switch"
Condition for visibility:
Parameter window Basic settings \ Parameter Parameter setting \ Option Individual
—
7.10.2.1.8
DEPENDENT PARAMETER
Reaction after ETS download
This parameter can be used to define which value (if any) is written to the group object Switch and af-
fects the output reaction after an ETS download.
With the Logic/Threshold, Disable and Forced Operation functions or the safety priority, writing the
group object Switch does not necessarily result in a changed contact position.
The value of group object Switch can be read correctly only after a new value has been received via the
ABB i-bus® KNX.
Options
Write group object "Switch"
with 0
Write group object "Switch"
with 1
Do not write group object
"Switch"
Condition for visibility:
Parameter window Basic settings \ Parameter Parameter setting \ Option Individual
Note
The value of the group object Switch is overwritten with the value 0.
The value of the group object Switch is overwritten with the value 1.
The value of group object Switch is not overwritten.
Note
The value of the group object Switch is overwritten with the value 0.
The value of the group object Switch is overwritten with the value 1.
The value of group object Switch is not overwritten.
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 196