ABB i-bus KNX Product Manual page 16

ABB i-bus® KNX PRODUCT OVERVIEW
KNX operation
Button/LED
S button / LED Manual operation
LED Group
Output button/ Output status LED
Tab. 6: Operating and display elements – KNX operation
Description/function
Select relay group:short button push < 2 s
Change to manual operation:
Button push 2 ... 5 s
Button without function
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 16
LED indicator
Manual operation active: LED: ON
KNX operation active: LED: OFF
Manual operation disabled:
LED: Flashing (1 Hz) or device is controlled
via i-bus® Tool
LED On: Group selected
LED Off: Group not selected
Switch mode:
LED On: Relay closed
LED Off: Relay open
LED flashing (1 Hz): Output disabled; manual
operation not possible
Shutter mode:
LED I On and LED II Off: Upper end position
LED I Off and LED II On: Lower end position
LED I Off and LED II Off: Intermediate posi-
tion
LED I flashing (1 Hz) and LED II Off: Moving
up
LED I Off and LED II flashing (1 Hz): Moving
down
LED I flashing (1 Hz) and LED II flashing
(1 Hz): Output disabled
LED I flashing (5 Hz) and LED II flashing
(5 Hz): Signals the active shutter output (af-
ter the group is changed or after the operat-
ing mode is changed to Manual operation )