This group object can be used to disable the function Delay for switching ON and OFF . If the function Delay for switching ON and OFF is disabled, the

switch-on command is forwarded without time function in the function chain and the output reacts according to its parameterization.

Telegram value:

1 = delay for switching ON and OFF disabled

0 = delay for switching ON and OFF enabled

Note

If a delay time was set for a scene assignment in the parameter Delay, this group object can also be used to disable the delay of the scene.

Condition for visibility:

Parameter window Configuration \ Parameter Enable output X + Y \ Option Yes

•

Parameter window Switch Actuator A \ Parameter window Functions \ Parameter Application \ Option Switch Actuator \ Parameter Enable function

Time \ Option Delay for switching ON and OFF

•

Parameter window Switch Actuator A \ Parameter window Delay for switching ON and OFF \ Parameter Parameter setting \ Option Individual \ Pa-

rameter Disable delay for switching ON and OFF via group object \ Option Yes

124

Staircase lighting permanent ON

This group object can be used to switch on the output permanently when the function Staircase lighting is active. Other functions continue to run in the

background, but they do not trigger any switching operation.

Telegram value:

1 = starts Permanent ON operation

0 = ends Permanent ON operation

Condition for visibility:

•

Parameter window Configuration \ Parameter Enable output X + Y \ Option Yes

•

Parameter window Switch Actuator A \ Parameter window Functions \ Parameter Application \ Option Switch Actuator \ Parameter Enable function

Time \ Option Staircase lighting

Staircase lighting time

125

This group object can be used to set the Staircase lighting time.

Telegram value:

0 ... 65,535 s

Condition for visibility:

•

Parameter window Configuration \ Parameter Enable output X + Y \ Option Yes

•

Parameter window Switch Actuator A \ Parameter window Functions \ Parameter Application \ Option Switch Actuator \ Parameter Enable function

Time \ Option Staircase lighting

•

Parameter window Switch Actuator A \ Parameter window Staircase lighting \ Parameter Parameter setting \ Option Individual \ Parameter

Change staircase lighting time via group object \ Option Yes

126

Warning staircase lighting

This group object can be used to indicate the end of the Staircase lighting time. The group object is set to the value 1 at the beginning of the Warning

time. The group object is set to the value 0 when the Warning time elapses. The group object can be used to switch a warning light.

Telegram value:

1 = warning time running

0 = warning time not running

Condition for visibility:

•

Parameter window Configuration \ Parameter Enable output X + Y \ Option Yes

•

Parameter window Switch Actuator A \ Parameter window Functions \ Parameter Application \ Option Switch Actuator \ Parameter Enable function

Time \ Option Staircase lighting

•

Parameter window Switch Actuator A \ Parameter window Staircase lighting \ Parameter Parameter setting \ Option Individual \ Parameter Warn-