ABB i-bus KNX Product Manual page 91

ABB i-bus® KNX FUNCTION
Together with other KNX components (in particular with the Shutter Control Unit JSB/S), the device can
be used to establish easy-to-use automatic sun protection control. Automatic sun protection can be ac-
tivated and parameterized individually for each output.
The blind/shutter and slat positions when the sun is shining can be defined in the parameter Position
for sun = 1 (sun).
The blind/shutter and slat positions when the sun is not shining can be defined in the parameter Posi-
tion for sun = 0 (no sun).
Alternatively, blind/shutter and slat positions can be received via the group objects Sun: Move to height
and Sun: Move slat as well.
Sunshine information can be determined using a connected sensor and received via the group object
Sun .
Delay times can be defined in the parameters Delay for sun = 1 and Delay for sun = 0 to avoid unneces-
sary blind/shutter position changes.
4.1.11.1 Activation/deactivation of automatic sun protection
The function Automatic sun protection is activated via the group object Activation of automatic sun
protection .
The parameter Deactivation of automatic sun protection can be used to set whether the function
Automatic sun protection is to be ended by receipt of a direct command as well.
In the parameter Automatic reactivation of automatic sun protection, it can be set whether the function
Automatic sun protection is automatically reactivated after deactivation due to receipt of a direct com-
mand.
Activation of the function Automatic sun protection can be disabled via the group object Disable
automatic sun protection . Changing to Direct operation can be disabled via group object
Disable direct operation .
More information → Direct operation, Page 91.
4.1.11.2 Direct operation
Direct operation is on-site operation of one or more outputs using local buttons. In Direct operation , di-
rect commands are sent to the direct group objects.
Direct group objects are:
• Move blind/shutter Up-Down (central object)
• Slat adjustment/stop Up-Down (central objekt)
• Move to position height (central objekt)
• Move to position slat (central objekt)
• Scene 1 ... 64 (central objekt)
• Move blind/shutter Up-Down
• Stop Up-Down
• Slat adjustment/stop Up-Down
• Move to position height
• Move to position slat
• Scene 1 ... 64
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 91