This group object can be used to disable direct operation. If direct operation is disabled, incoming telegrams on the direct group objects will not be exe-

cuted.

Automatic control has a higher priority. Even if direct operation is enabled, direct telegrams are executed only when automatic control is disabled.

Telegram value:

1 = direct operation disabled

0 = direct operation enabled

Condition for visibility:

•

Parameter window Configuration \ Parameter Enable output X + Y \ Option Yes

Parameter window Shutter Actuator A+B \ Parameter window Functions \ Parameter Application \ Option Shutter Actuator \ Parameter Enable

•

function Automatic sun protection \ Option Yes

Parameter window Shutter Actuator A+B \ Parameter window Automatic sun protection \ Parameter Parameter setting \ Option Individual \ Param-

•

eter Enable group object "Disable direct operation" \ Option Yes

Status Height

133

This group object can be used to output the current position of the blind/shutter.

The sending behavior can be defined in the parameter Send value of group object. If the "On request" or "After change or on request" option is selected,

the status is sent after a movement is completed.

Telegram value:

0 % = upper end position

1 % ... 99 % = intermediate position

100 % = lower end position

Condition for visibility:

•

Parameter window Configuration \ Parameter Enable output X + Y \ Option Yes

•

Parameter window Shutter Actuator A+B \ Parameter window Functions \ Parameter Application \ Option Shutter Actuator

•

Parameter window Shutter Actuator A+B \ Parameter window Status messages \ Parameter Parameter setting \ Option Individual \ Parameter En-

able group objects "Status Height/Slat" \ Option Yes

134

Status Slat

This group object can be used to output the current position of the slats.

The sending behavior can be defined in the parameter Send value of group object. If the "On request" or "After change or on request" option is selected,

the status is sent after a movement is completed.

Telegram value:

0 % = slats open

1 % ... 99 % = intermediate position

100 % = slats closed

Condition for visibility:

•

Parameter window Configuration \ Parameter Enable output X + Y \ Option Yes

Parameter window Shutter Actuator A+B \ Parameter window Functions \ Parameter Application \ Option Shutter Actuator

•

Parameter window Shutter Actuator A+B \ Parameter window Status messages \ Parameter Parameter setting \ Option Individual \ Parameter En-

able group objects "Status Height/Slat" \ Option Yes

135

Status Upper end position

This group object can be used to output whether the blind/shutter is at the upper end position.

The sending behavior can be defined in the parameter Send value of group object. If the "On request" or "After change or on request" option is selected,

the status is sent after the upper end position is reached or left.

Telegram value:

1 = blind/shutter in upper end position

0 = blind/shutter not in upper end position

Condition for visibility:

•

Parameter window Configuration \ Parameter Enable output X + Y \ Option Yes

•

Parameter window Shutter Actuator A+B \ Parameter window Functions \ Parameter Application \ Option Shutter Actuator

•

Parameter window Shutter Actuator A+B \ Parameter window Status messages \ Parameter Parameter setting \ Option Individual \ Parameter En-

able group objects "Status Upper/Lower end pos." \ Option Yes

136

Status Lower end position

This group object can be used to output whether the blind/shutter is at the lower end position.

The sending behavior can be defined in the parameter Send value of group object. If the "On request" or "After change or on request" option is selected,

the status is sent after the lower end position is reached or left.

Telegram value:

1 = blind/shutter in lower end position

0 = blind/shutter not in lower end position

Condition for visibility:

Parameter window Configuration \ Parameter Enable output X + Y \ Option Yes

•

Parameter window Shutter Actuator A+B \ Parameter window Functions \ Parameter Application \ Option Shutter Actuator

Parameter window Shutter Actuator A+B \ Parameter window Status messages \ Parameter Parameter setting \ Option Individual \ Parameter En-

•

able group objects "Status Upper/Lower end pos." \ Option Yes

Group Object Name