This group object can be used to activate the function Automatic sun protection . Automatic sun protection can be controlled via the following group ob-

jects:

•

Sun

•

Sun: Move to height

•

Sun: Move slat

When automatic sun protection is active, the output updates itself based on the values stored in the automatic sun protection group objects.

When automatic sun protection is deactivated, the output does not react to incoming telegrams on the automatic sun protection group objects. Move-

ments initiated by automatic commands are completed when automatic sun protection is ended.

Telegram value:

1 = automatic sun protection activated, direct operation deactivated

0 = automatic sun protection deactivated, direct operation activated

Note

A reference movement interrupts automatic sun protection. Incoming automatic telegrams are executed after the reference movement is completed.

Condition for visibility:

•

Parameter window Configuration \ Parameter Enable output X + Y \ Option Yes

Parameter window Shutter Actuator A+B \ Parameter window Functions \ Parameter Application \ Option Shutter Actuator \ Parameter Enable

•

function Automatic sun protection \ Option Yes

Sun

128

If a telegram with the value 1 is received on this group object, the blind/shutter will move to the position defined in the parameter Position for sun = 1

(sun). If a telegram with the value 0 is received, the blind/shutter will move to the position defined in the parameter Position for sun = 0 (no sun).

To prevent frequent alternation between moving up and moving down due to weather, the reaction to incoming telegrams can be delayed via the pa-

rameters Delay for sun = 1 and Delay for sun = 0.

Telegram value:

1 = sun

0 = no sun

Condition for visibility:

•

Parameter window Configuration \ Parameter Enable output X + Y \ Option Yes

Parameter window Shutter Actuator A+B \ Parameter window Functions \ Parameter Application \ Option Shutter Actuator \ Parameter Enable

•

function Automatic sun protection \ Option Yes

129

Sun: Move to height

If automatic sun protection is active and a telegram is received on this group object, the blind/shutter will be positioned according to the value received.

If automatic sun protection is deactivated, telegrams on this group object are ignored.

When the the target position is reached, the slats are set to the same position as before the movement. If a telegram is received on the group object

Sun: Move slat during the movement, the slats will be set according to the received value after the target position is reached.

Telegram value:

0 % = upper end position

1 % ... 99 % = intermediate position

100 % = lower end position

Condition for visibility:

•

Parameter window Configuration \ Parameter Enable output X + Y \ Option Yes

•

Parameter window Shutter Actuator A+B \ Parameter window Functions \ Parameter Application \ Option Shutter Actuator \ Parameter Enable

function Automatic sun protection \ Option Yes

Sun: Move slat

130

If automatic sun protection is active and a telegram is received on this group object, the slats will be positioned according to the value received. If auto-

matic sun protection is deactivated, telegrams on this group object are ignored.

Telegram value:

0 % = slats open

1 % ... 99 % = intermediate position

100 % = slats closed

Note

The slats are positioned only after the blind/shutter reaches the target position.

Condition for visibility:

Parameter window Configuration \ Parameter Enable output X + Y \ Option Yes

•

Parameter window Shutter Actuator A+B \ Parameter window Functions \ Parameter Application \ Option Shutter Actuator \ Parameter Enable

function Automatic sun protection \ Option Yes

131

Disable automatic sun protection

This group object can be used to disable the function Automatic sun protection . If automatic sun protection is disabled, activation via the group object

Activation of automatic sun protection will not be possible and the output can be activated only via direct group objects.

Telegram value:

1 = automatic sun protection disabled

0 = automatic sun protection enabled

Condition for visibility:

•

Parameter window Configuration \ Parameter Enable output X + Y \ Option Yes

Parameter window Shutter Actuator A+B \ Parameter window Functions \ Parameter Application \ Option Shutter Actuator \ Parameter Enable

•

function Automatic sun protection \ Option Yes

•

Parameter window Shutter Actuator A+B \ Parameter window Automatic sun protection \ Parameter Parameter setting \ Option Individual \ Param-