ABB i-bus KNX Product Manual page 201

ABB i-bus® KNX PARAMETERS
7.10.4 Parameter window Staircase lighting
This parameter window is visible only if, in the Parameter window Functions, the following option is
set for the parameter Enable function Time: Staircase lighting .
The following settings can be made in the Parameter window Staircase lighting:
• Duration and switching reaction of the function Staircase lighting
• Warning before the staircase lighting is switched off
• Disable function Staircase lighting
• Reaction after the function Permanent ON and bus voltage recovery
More information → Function Staircase lighting, Page 92.
If several Shutter Actuator outputs are to be set to the same values, parameterization can be per-
formed in Parameter window Switch Actuator template.
Fig. 50: Parameter window Staircase lighting
Parameter
• Parameter setting
• Staircase lighting time
• Staircase lighting can be started again
• Staircase lighting switchable
• Warning before switching off the staircase lighting
• Disable staircase lighting via group object
• Change staircase lighting time via group object
• Restart staircase lighting after end of permanent ON
Note
Note
• Staircase lighting time extendable (pumping)
• Warning time
• Quantity of Off/On changes
• Disable staircase lighting after bus voltage recovery
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 201