ABB i-bus KNX Product Manual page 171

ABB i-bus® KNX PARAMETERS
7.9.6 Parameter window Automatic sun protection
This parameter window is visible only if, in the Parameter window Functions, the following option is
set for the parameter Enable function Automatic sun protection: Yes .
The following settings can be made in the Parameter window Automatic sun protection:
• Settings for automatic sun protection control
• Switchover between Automatic operation and Direct operation
• Reaction of the blind/shutter to sunlight
More information → Automatic sun protection, Page 90.
If several Shutter Actuator output pairs are to be set to the same values, parameterization can be per-
formed in Parameter window Shutter Actuator template.
Fig. 44: Parameter window Automatic sun protection
Note
Note
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 171