ABB i-bus KNX Product Manual page 131

ABB i-bus® KNX PARAMETERS
7.9.2 Parameter window Basic settings
The following settings can be made in the Parameter window Basic settings:
• Connection with the central shutter group objects
• Link with the function Logic/Threshold
• Reaction on bus voltage failure, bus voltage recovery and download
If several Shutter Actuator output pairs are to be set to the same values, parameterization can be per-
formed in Parameter window Shutter Actuator template.
Fig. 40: Parameter window Basic settings
Parameter
• Parameter setting
• Output reacts to central shutter group objects
• Output reacts to
• Reaction on bus voltage failure
• Reaction after bus voltage recovery
• Reaction after ETS download
Note
• Reaction on result "0"
• Scene assignment
• Position height (0 % = top; 100 % = bottom)
• Position slat (0 % = open; 100 % = closed)
• Reaction on result "1"
• Scene assignment
• Position height (0 % = top; 100 % = bottom)
• Position slat (0 % = open; 100 % = closed)
• Position height (0 % = top; 100 % = bottom)
• Position slat (0 % = open; 100 % = closed)
• Position height (0 % = top; 100 % = bottom)
• Position slat (0 % = open; 100 % = closed)
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 131