ABB i-bus KNX Product Manual page 205

ABB i-bus® KNX PARAMETERS
—
7.10.4.1.5
DEPENDENT PARAMETER
Disable staircase lighting via group object
This parameter can be used to define whether the function Staircase lighting can be disabled via the
group object Disable staircase lighting . If the function Staircase lighting is disabled, the switch-on com-
mand is forwarded without time function in the function chain and the output reacts according to its pa-
rameterization.
Options
No
Yes
Condition for visibility:
Parameter window Staircase lighting \ Parameter Parameter setting \ Option Individual
—
7.10.4.1.5.1
DEPENDENT PARAMETER
Disable staircase lighting after bus voltage recovery
This parameter can be used to define whether the function Staircase lighting is disabled after bus volt-
age recovery.
Options
No
Yes
Condition for visibility:
Parameter window Staircase lighting \ Parameter Parameter setting \ Option Individual \ Parameter
Disable staircase lighting via group object \ Option Yes
—
7.10.4.1.6
DEPENDENT PARAMETER
Change staircase lighting time via group object
This parameter can be used to define whether the Staircase lighting time can be changed via the group
object Staircase lighting time .
Once it has begun, the function Staircase lighting is initially completed without change. The changed
staircase lighting time is used only the next time the function Staircase lighting is retrieved.
Options
No
Yes
Condition for visibility:
Parameter window Staircase lighting \ Parameter Parameter setting \ Option Individual
The function Staircase lighting cannot be disabled.
The function Staircase lighting can be disabled. The group object Disable staircase lighting is en-
abled.
•
Note
The staircase lighting time cannot be changed via the group object.
The staircase lighting time can be changed via the group object. The group object Staircase lighting
time is enabled.
Disable staircase lighting after bus voltage recovery
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 205