ABB i-bus KNX Product Manual page 193

ABB i-bus® KNX PARAMETERS
—
7.10.2.1.3
DEPENDENT PARAMETER
Output reacts to
This parameter can be used to define whether the output is influenced by the result of a Logic or
Threshold function.
More information → Function Logic, Page 84, → Function Threshold, Page 85.
Options
No Logic/Threshold function
Logic/Threshold x
Condition for visibility:
Parameter window Basic settings \ Parameter Parameter setting \ Option Individual
—
7.10.2.1.3.1
DEPENDENT PARAMETER
Reaction on result "0"
This parameter can be used to define how the output reacts when the result of the Logic or Threshold
function is 0.
Options
No reaction
ON
OFF
Condition for visibility:
Parameter window Basic settings \ Parameter Parameter setting \ Option Individual \ Parameter Out-
put reacts to \ Option Logic/Threshold x
—
7.10.2.1.3.2
DEPENDENT PARAMETER
Reaction on result "1"
This parameter can be used to define how the output reacts when the result of the Logic or Threshold
function is 1.
Options
No reaction
ON
OFF
Condition for visibility:
Parameter window Basic settings \ Parameter Parameter setting \ Option Individual \ Parameter Out-
put reacts to \ Option Logic/Threshold x
The output does not react to a Logic or Threshold function.
The output reacts to the Logic or Threshold function x (x = 1 ... 24).
• Reaction on result "0"
• Reaction on result "1"
The relay switching position remains unchanged.
The result acts like an On telegram on the group object Switch . The relay contact position depends
on the setting of the output as an NC contact or NO contact .
The result acts like an Off telegram on the group object Switch . The relay contact position depends
on the setting of the output as an NC contact or NO contact .
The relay switching position remains unchanged.
The result acts like an On telegram on the group object Switch . The relay contact position depends
on the setting of the output as an NC contact or NO contact .
The result acts like an Off telegram on the group object Switch . The relay contact position depends
on the setting of the output as an NC contact or NO contact .
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 193