ABB i-bus KNX Product Manual page 119

ABB i-bus® KNX PARAMETERS
—
7.6.1.1
DEPENDENT PARAMETER
Group object "Connection A" after bus voltage recovery
This parameter can be used to define the value that will be written to the group object Connection A af-
ter bus voltage recovery.
Options
1
0
Condition for visibility:
Parameter window Logic/Threshold 1 \ Parameter Function of the logic gate \ Option AND
—
7.6.1.2
DEPENDENT PARAMETER
Group object "Connection B" after bus voltage recovery
This parameter can be used to define the value that will be written to the group object Connection B af-
ter bus voltage recovery.
Options
1
0
Condition for visibility:
Parameter window Logic/Threshold 1 \ Parameter Function of the logic gate \ Option AND
—
7.6.1.3
DEPENDENT PARAMETER
Invert result
This parameter can be used to define whether the result of the function Logic will be output inverted.
Options
No
Yes
Condition for visibility:
Parameter window Logic/Threshold 1 \ Parameter Function of the logic gate \ Option AND
The value 1 is written to the group object, but does not pass through the function Logic . Writing the
group object does not affect the result of the function Logic .
The value 0 is written to the group object, but does not pass through the function Logic . Writing the
group object does not affect the result of the function Logic .
The value 1 is written to the group object, but does not pass through the function Logic . Writing the
group object does not affect the result of the function Logic .
The value 0 is written to the group object, but does not pass through the function Logic . Writing the
group object does not affect the result of the function Logic .
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 119