ABB i-bus KNX Product Manual page 172

ABB i-bus® KNX PARAMETERS
Parameter
• Parameter setting
• Deactivation of automatic sun protection
• Enable group object "Disable automatic sun protection"
• Enable group object "Disable direct operation"
• Position for sun = 1 (sun)
• Delay for sun = 1
• Position for sun = 0 (no sun)
• Delay for sun = 0
• Read activated automatic sun protection group objects after bus voltage recovery and download
7.9.6.1 Parameter setting
This parameter can be used to define whether the settings for the parameter window are adopted from
the template or each parameter is set individually.
Options
Apply from template
Individual
—
7.9.6.1.1
DEPENDENT PARAMETER
Deactivation of automatic sun protection
This parameter can be used to define when the Automatic sun protection is deactivated.
If the function Automatic sun protection is activated, telegrams received on the direct group objects (→
Direct operation, Page 91) are ignored. After deactivation of automatic sun protection, the blind/shutter
remains in its current position and can be activated via the direct group objects.
Reference movements can be performed even while automatic sun protection is active.
Options
Via group object
Via group object and direct
command
Condition for visibility:
Parameter window Automatic sun protection \ Parameter Parameter setting \ Option Individual
• Automatic reactivation of automatic sun protection
• Time for automatic reactivation of automatic sun protection
• Position height (0 % = top; 100 % = bottom)
• Position slat (0 % = open; 100 % = closed)
• Position height (0 % = top; 100 % = bottom)
• Position slat (0 % = open; 100 % = closed)
The parameterization is adopted from the template for each parameter.
Parameters can be set individually.
• Deactivation of automatic sun protection
• Enable group object "Disable automatic sun protection"
• Enable group object "Disable direct operation"
• Position for sun = 1 (sun)
• Delay for sun = 1
• Position for sun = 0 (no sun)
• Delay for sun = 0
• Read activated automatic sun protection group objects after bus voltage recovery and download
Automatic sun protection is activated (1) or deactivated (0) exclusively by a telegram on the group
object Activation of automatic sun protection .
Automatic sun protection is activated (1) or deactivated (0) by a telegram on the group object
Activation of automatic sun protection . Additionally, telegrams received on the direct group objects
lead to deactivation of automatic sun protection.
• Automatic reactivation of automatic sun protection
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 172