ABB i-bus KNX Product Manual page 129

ABB i-bus® KNX PARAMETERS
7.9.1.1 Application
This parameter can be used to define whether the output pair is used as a Shutter Actuator output pair
or as two separate Shutter Actuator outputs.
Options
Switch Actuator
Shutter Actuator
—
7.9.1.1.1
DEPENDENT PARAMETER
Operating mode
This parameter can be used to set the operating mode of the Shutter Actuator output pair. The Parame-
ter window Blind/Shutter differs according to the operating mode.
Options
Blind/shutter control with slat
adjustment
Blind/shutter control without
slat adjustment
Condition for visibility:
Parameter window Functions \ Parameter Application \ Option Shutter Actuator
—
7.9.1.1.2
DEPENDENT PARAMETER
Enable function Scenes
This parameter can be used to enable the function Scenes , the associated Parameter window Scene as-
signments and the group object Scene 1 ... 64 .
The scene assignments and the reaction on scene retrieval are defined in Parameter window Scene as-
signments.
Options
No
Yes
Condition for visibility:
Parameter window Functions \ Parameter Application \ Option Shutter Actuator
To control shutters, vertical blinds and other shading systems with slats, etc.
To control blinds, awnings and other products without slats, as well as window and door drives, etc.
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 129